3. Perform the following actions:
▪ Locking/Unlocking the Front Panel on page 46.
▪ Importing/Exporting Manager Settings on page 46.
▪ Locating the Device on page 47.
▪ Restarting or Resetting the Device on page 48.
General settings are defined.
Locking/Unlocking the Front Panel
To lock/unlock the front panel:
1. In the Navigation pane, Select Manager Settings. The General tab in the Manager
Settings page appears (see Figure 51).
2. Lock/Unlock the device front panel:
▪ Click Off, to enable device control from the front panel via the LCD screen and the
navigation buttons (see Using Menu Navigation Buttons on page 8).
▪ Click On, to disable device control via the navigation buttons.
Importing/Exporting Manager Settings
Import or export KDS-7-MNGR settings, including Network settings, the time and date,
security settings and the advanced diagnostics data. When selecting all but IP settings,
Network settings are excluded.
To import or export the manager settings:
1. In the Navigation pane, Select Manager Settings. The General tab in the Manager
Settings page appears (see Figure 51).
2. In the General Settings page, select the Manager setting types to import or export.
▪ All – Select all the Manager settings.
▪ Without IP – Select all the Manager Settings, excluding the IP address.
3. When importing, do the following (when exporting, go to the next step):
▪ Click IMPORT. An Open file appears.
▪ Select the file to import (settings.tar.gz).
▪ Click Open to import the file.
4. To export settings, click EXPORT.
The settings file is created (settings.tar.gz).
The KDS-7-MNGR settings file is imported/exported.
To Next Page
Loading...