Kramer KDS-USB2 User Manual

Kramer Electronics Ltd.
SwitchableUSB – Contents
i
Contents
Introduction 1
1 Overview 2
2 General Information 3
2.1 Generic Packet Structure 4
2.2 Network Broadcast Notes 5
3 Supported Messages 6
3.1 Request Device Information 7
3.2 Reply Device Information 8
3.3 Ping 9
3.4 Acknowledge 10
3.5 Request Extended Device Information 11
3.6 Reply Extended Device Information 12
3.7 Pair To Device 13
3.8 Remove Device Pairing 14
3.9 Request Device Topology 15
3.10 Reply Device Topology 16
3.11 Use DHCP 17
3.12 Use Static IP 18
3.13 Negative Acknowledge 19
3.14 Use Filtering Strategy 20
3.15 LED Locator On 21
3.16 Led Locator Off 22
3.17 Reset Device 23
3.18 Request Configuration Response Data 24
3.19 Reply Configuration Response Data 25
3.20 Request Link Status 27
3.21 Reply Link Status 28
3.22 Remove All Pairings 30
3.23 Force Pair To Device 31
4 Appendix A 32
4.1 Abbreviations 33
4.3 References 34

Kramer KDS-USB2 Specifications

General

Brand	Kramer
Model	KDS-USB2
Category	Switch
Language	English