Kramer MV-6

KRAMER E LE CT RONICS LTD.
USER MANUAL
MODEL:
MV-6
3G HD-SDI Multiviewer
P/N: 2900-000737 Rev 8

Kramer MV-6 Specifications

General

Brand	Kramer
Model	MV-6
Category	Switch
Language	English

Summary

MV-6 Quick Start Guide

Initial Setup and Connection

Steps for unpacking, installing, and connecting the MV-6 to power and video sources.

Basic Operation Overview

Guidance on initial power connection and fundamental operating procedures for the MV-6.

2 Getting Started

2.1 Achieving the Best Performance

Guidance on using high-quality cables and proper placement for optimal device performance.

2.2 Safety Instructions

Important cautions and warnings regarding operator safety and unit handling.

4 Installing in a Rack

5 Connecting the MV-6

5.1 Connecting to the RS-232 Port

Instructions for establishing an RS-232 connection to the MV-6 for remote control.

5.2 Connecting via Ethernet

Methods for connecting the MV-6 to a PC or network via Ethernet.

5.2.1 Ethernet Connection to PC

6 Operating the MV-6 Locally

6.2 Window Size and Position Adjustment

6.3 Custom Window Layouts

6.4 Front Panel Control Features

6.5 Menu Navigation and Sub-Menus

7 Operating the MV-6 Remotely

7.1 RS-232 and Ethernet Control

7.2 MV-6 Controller Software Interface

7.3 Software Connection and Configuration

7.5 Device Configuration and Firmware Update

How to modify device details and update the MV-6 firmware using the controller software.

8 Technical Specifications

9 Default Communication Parameters

10 Kramer Protocol 3000 Syntax

11 Protocol 3000 Commands

11.1 System and Video Commands

11.2 Multiviewer and Communication Commands

Commands for multiviewer functions and network/serial communication parameter configuration.