Kramer MV-6

MV-6 - Protocol 3000 Commands
55
11.4 Multiviewer Commands
Command
Description
Type
Permission
CRDT
Set/get window size and position
Multiviewer
End User
OVRL
Set/get text overlay parameters
Multiviewer
End User
OVRLBK
Set/get text overlay background parameters
Multiviewer
End User
OVRLTXT
Set/get overlay text
Multiviewer
End User
W-ACTIVE
Set/get active window
Multiviewer
End User
W-ENABLE
Set/get window visibility
Multiviewer
End User
W-FRZ
Set/get freeze on selected window
Multiviewer
End User
W-LAYER
Set/get window overlay order OR
Set/get ALL window overlay order
Multiviewer
End User
W-SRC
Set/get window source
Multiviewer
End User
Command - CRDT
Command Type - Multiviewer
Command Name
Permission
Transparency
Set:
CRDT
End User
Public
Get
CRDT?
End User
Public
Description
Syntax
Set:
Set window size and position
#CRDT␠win_num,x0,y0,x1,y1␍
Get:
Get window size and position
#CRDT?␠win_num␍
Response
Set: ~ nn@CRDT␠win_num,x0,y0,x1,y1[result]␍␊
Get: ~ nn@CRDT␠ win_num,x0,y0,x1,y1␍␊
Parameters
Set:
win_num - 1-4; x0,y0 - top-left coordinate, x1, y1 - bottom-right coordinate
Get:
x0,x1 <=180
y0,y1 <=144(for PAL)
y0,y1 <= 120(for NTSC)
win_num = 1-4 or 0 (for output window)
Response Triggers
Notes