6 Operating the MV-6 Locally
The MV-6 sports an LCD video preview screen on which the live video output is
shown. Changes made to the device configuration are reflected immediately on
the screen allowing you to monitor the output in real-time.
The MV-6 is operated locally using the front panel buttons.
6.1 Using the Display
When the MV-6 is powered on, the following is displayed briefly:
MV6 Multiviewer
KRAMER
The device then performs a self-test. If the test is successful the Window/Input
list is displayed, an example of which is shown below.
WIN A B C D E F
INP 2 4 5 6 1 3
During operation, if there is no button activity for approximately 60 seconds the
display reverts to the Window/Input list.
6.2 Adjusting the Size of a Window
The horizontal and vertical size of each window can be modified.
To adjust the size of a window:
1. Select the required window by pressing one of the Window buttons.
The relevant button lights.
2. Press either the H Size or V Size button to adjust the width or height of
the selected window.
To Next Page
Loading...
