Kramer MV-6

24
MV-6 - Operating the MV-6 Remotely
Figure 8: MV-6 Controller Software Main Window
#
Feature
Function
1
Menu Bar
Operate and configure the device using the Menu Bar
options (see Section 7.3)
2
Quick Access Toolbar
Operate and configure the device using the quick
access toolbar buttons (see Section 7.3.1)
3
Windows Position
Modify window size and position by dragging and
dropping individual windows (see Section 7.3.3)
4
Layer Order
Click and drag individual layers to arrange the layer
order (see Section 7.3.6)
5
Status Indicator
Indicates whether or not the Controller software is
connected to the device (see Section 7.3.5)
6
Switch Windows
Press to select a window (see Section 7.3.9)
7
Switch Inputs
Press to select an inputs (see Section 7.3.8)
Note: Unless the device is in off-line mode (by pressing the Take button), when
a change is made on the device (for example, a different output is selected),
the change is reflected almost immediately in the main window of the Controller
Software. Similarly, if a change is made in the Controller Software, the change
is reflected almost immediately on the device.