7.3.5 Connection Status
The connection status can be one of the following states:
Online—the device is connected and being updated in real-time by the
software
Online, in take mode (not updating device)—the device is connected but
changes are only implemented when the Update button is pressed
Offline—in Take mode
7.3.6 Changing the Layer Order
You can modify the order in which the windows are arranged. The top layer is
on the right and the bottom layer on the left. In Figure 13 layer A is on top and
layer F is at the bottom.
Figure 13: Layer Order
To change the window layer order:
1. Click and hold on the layer that you want to move.
2. Drag the layer to the right or left into the required position and release.
The layer is placed in the required position.
To Next Page
Loading...
Need help?
General
