Kramer MV-6

32
MV-6 - Operating the MV-6 Remotely
7.3.9 Changing a Window Setup
To change a window setup:
1. Right-click on the relevant Windows button.
The Window Setup window appears as shown in Figure 15.
Figure 15: Windows Setup Window
2. From the Connect to Input drop-down list, select the required input.
3. Click the Freeze icon to freeze this window.
4. Click the Visibility icon to modify the visibility of this window.
5. In the Position fields, enter the x and y position for the window.
6. In the Size fields, enter the width and height for the window.
7. Click OK.
The Window setup is changed.