Kramer MV-6 User Manual

MV-6 - Operating the MV-6 Remotely
23
7 Operating the MV-6 Remotely
The MV-6 can be operated remotely using the Kramer MV-6 Controller
software via the:
 RS-232 serial port (see Section 7.1)
 Ethernet port (see Section 7.2)
7.1 Operating the MV-6 via the RS-232 Serial Port
Kramer offers free control software that allows you to operate the MV-6
remotely via a PC or serial controller using serial commands (see
Section 11). This software can be downloaded from
http://www.kramerelectronics.com/support/product_downloads.asp.
7.2 MV-6 Controller Software
For details regarding connecting to the Ethernet port on the MV-6, see
Section 5.2.
The Controller software requires the following:
 Windows™ XP, Vista or Windows™ 7
 Microsoft .Net Framework version 3.5
To install the Controller software, download the software and run the setup file.
After installation, running the Controller software for the first time displays a
window similar to that shown in Figure 8.

Kramer MV-6 Specifications

General

Brand	Kramer
Model	MV-6
Category	Switch
Language	English