Kramer MV-6

MV-6 - Operating the MV-6 Remotely
25
7.3 The Menu Bar
The menu bar options are shown in the following table.
Menu
Bar
Options
Sub Menu
Description
FILE
Open
Open an existing configuration
Save
Save the current configuration
Exit
Exit the MV-6 Controller software
DEVICE
Connect/
Disconnect
Connect or disconnect to the device (see
Section 7.3.2)
Take/Update
Press Take to put the device in off-line mode. Press
Update to implement waiting changes and return
the device to on-line mode (see Section 7.3.7)
Firmware Update
Update the device firmware (see Section 7.3.12)
Device Details
Retrieve and display the device details, such as,
model, unit name, version, and so on. (see
Section 7.3.11)
DISPLAY
Presets
Set the screen to display one of the preconfigured
configurations:
6-Split, Quad, Full, 2-Split
Output Resolution
Set the output resolution:
720P 59.94Hz, 720P 50Hz, 1080P 60Hz, 720P
60Hz, 1080P 59.94Hz, 1080P 50Hz
Genlock Control
Unlocks the genlock or sets the source for genlock
control:
Free Run (default), Input 1, Input 2, Input 3, Input 4,
Input 5, Input 6
Background Color
Sets the background color of the window
Window Border
Turns the window border on and off
Refresh
Retrieves full information from the device
ABOUT
Displays the Step-in Software and Kramer company details
Note: Any actions that you are not authorized to perform are grayed out.