7.3.14 Displaying the MV-6 Software Version Number
To display the MV-6 Software version number:
1. From the Menu bar, click About.
The About MV6 Controller window appears as shown in Figure 18.
Figure 18: About MV-6 Window
2. Click OK to close the window.
7.4 Upgrading the Firmware
For instructions on upgrading the firmware see “Upgrading the MV-6 Firmware
Using the K-Upload Software”.
Note: To upgrade to firmware V3.2.7321 you must use K-Upload software
V1.0.0.50. After upgrading, perform a factory reset (see Section 6.8).
To Next Page
Loading...
Need help?
General
