MV-6 - Protocol 3000 Commands
11.5 Communication Commands
Set/get Ethernet port protocol
Command Type - Communication
Set Ethernet port protocol
#ETH-PORT␠portType, ETHPort, portNum␍
Get Ethernet port protocol
#ETH-PORT?␠portType, portNum␍
~nn@ ETH-PORT␠portType, ETHPort, portNum␍␊
portNum - 1-4 TCP/UDP port enumerator (equals the connected com port number from the tunneling
port)
portType - TCP/UDP
ETHPort - TCP/UDP port number