Kramer MV-6

60
MV-6 - Protocol 3000 Commands
Command - W-LAYER
Command Type - Multiviewer
Command Name
Permission
Transparency
Set:
W-LAYER
End User
Public
Get
W-LAYER?
End User
Public
Description
Syntax
Set 1:
Set window overlay order
#W-LAYER␠ win_num,value␍
Set 2:
Set all window overlay order
#W-LAYER␠0xFF,value1,value2, …,valueN␍
Get 1:
Get window overlay order
#W-LAYER?␠win_num␍
Get 2:
Get all window overlay order
#W-LAYER?␠0xFF␍
Response
Set 1/Get 1: ~ nn@W-LAYER␠ win_num, value␍␊
Set 2/Get 2: ~ nn@W-LAYER␠0xFF,value1,value2,…valueN␍␊
Parameters
win_num - window number setting layer
value - overlay order number
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if W-LAYER was set by any other external control device
(button press, device menu and similar)
Notes
In case of overlays order list, number of expected layers is maximum number of windows in device
Command – W-SRC
Command Type - Multiviewer
Command Name
Permission
Transparency
Set :
W-SRC
User
Public
Get
W-SRC?
User
Public
Description
Syntax
Set:
Set window source
#W-SRC␠ win_num,src ␍
Get:
Get window source
#W-SRC?␠ win_num␍
Response
~ nn @W-SRC␠ win_num,src ␍␊
Parameters
win_num - window number to set new source
src – input source to connect to window (1… max input number)
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if W-SRC was set by any other external control device
(button press, device menu and similar)
Notes
src limits can vary for different devices