Kramer MV-6

MV-6 - Protocol 3000 Commands
59
Command - W-ENABLE
Command Type - Multiviewer
Command Name
Permission
Transparency
Set:
W-ENABLE
End User
Public
Get:
W-ENABLE?
End User
Public
Description
Syntax
Set:
Set window visibility
#W-ENABLE␠win_num,enable_flag␍
Get:
Get window visibility status
#W-ENABLE?␠win_num␍
Response
~ nn@ W-ENABLE␠win_num, enable_flag␍␊
Parameters
win_num - window number to enable/disable
enable_flag - See Section 12.1 On/Off
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if W-ENABLE was set by any other external control
device (button press, device menu and similar)
Notes
Command - W-FRZ
Command Type - Multiviewer
Command Name
Permission
Transparency
Set:
W-FRZ
End User
Public
Get
W-FRZ?
End User
Public
Description
Syntax
Set:
Set freeze on selected window
#W-FRZ␠ win_num,freeze_flag␍
Get:
Get window freeze status
#W-FRZ?␠ win_num␍
Response
~ nn@W-FRZ␠ win_num, freeze_flag␍␊
Parameters
win_num - window number to enable/disable
freeze_flag - see Section 12.1 On/Off
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if W-FRZ was set by any other external control device
(button press, device menu and similar)
Notes