Kramer MV-6 - Page 60

56
MV-6 - Protocol 3000 Commands
Command - OVRL
Command Type - Multiviewer
Command Name
Permission
Transparency
Set:
OVRL
End User
Public
Get
OVRL?
End User
Public
Description
Syntax
Set:
Set text overlay parameters
#OVRL␠stage, stage_id,mode,r,g,b,alpha␍
Get:
Get text overlay parameters
#OVRL?␠stage, stage_id ␍
Response
~ nn@OVRL␠stage, stage_id,mode,r,g,b,alpha␍␊
Parameters
stage - input/output (see Section 12.4 Stage)
stage_id - number of chosen stage (1.. max number of inputs/outputs)
mode - show/ hide text overlay string (see Section 12.1 On/Off)
r - red component value (0-255)
g - green component value (0-255)
b - blue component value (0-255)
alpha - alpha value (0-255)
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if OVRL was set by any other external control device
(button press, device menu and similar)
Notes