Kramer MV-6

54
MV-6 - Protocol 3000 Commands
Command - VID-RES
Command Type - Video
Command Name
Permission
Transparency
Set:
VID-RES
End User
Public
Get
VID-RES?
End User
Public
Description
Syntax
Set:
Set output resolution
#VID-RES␠ stage, stage_id,is_native,resolution␍
Get:
Get output resolution
#VID-RES?␠stage,stage_id,is_native ␍
Response
~ nn@VID-RES␠stage,stage_id,is_native,resolution␍␊
Parameters
stage - input/output (see Section 12.4 Stage)
stage_id - number of chosen stage (1... max number of inputs/outputs)
is_native - native resolution flag (see Section 12.1 On/Off)
resolution - resolution index (see Section 12.5 Video Resolutions)
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if VID-RES was set by any other external control device
(button press, device menu and similar)
Notes
“Set” command is only applicable for stage=Output
“Set” command with is_native=ON sets native resolution on selected output (resolution index sent = 0).
Device sends as answer actual VIC ID of native resolution
“Get” command with is_native=ON returns native resolution VIC, with is_native=OFF returns current
resolution
To use “custom resolutions” (entries 100-105 in Section 12.6 Custom Resolution Parameters), define them
using the DEF-RES command