Kramer MV-6

MV-6 - Protocol 3000 Commands
53
Command - GNLCK
Command Type - Video
Command Name
Permission
Transparency
Set:
GNLCK
Administrator
Public
Get:
GNLCK?
End User
Public
Description
Syntax
Set:
Set genlock source and mode
#GNLCK␠ out,in,type␍
Get:
Get genlock source, mode and status
#GNLCK?␠out␍
Response
Set / Get: ~ nn@GNLCK␠out,in,status ␍␊
Parameters
out - output number (1 .. max number of outputs)
in - input number (1… max number of inputs)
type - genlock type (see Section 12.3 Genlock Types)
status - genlock status (ON/OFF) (see Section 12.1 On/Off)
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
After execution, response is sent to all com ports if GNLCK was set for any other external control device
(button press, device menu and similar) or genlock status changed
Notes