3.13 Negative Acknowledge
This message is a generic NAK message that may be sent in response to a Pair To Device, Remove
Device Pairing or Request Device Topology message. It indicates to the client that their request was
received, but that no action will be taken as a result of that message. The Message ID field should be
sufficient to determine which message is being NAKed.
Byte Offset
+-----------------------------------------+-----------------------------------------+
0 | Magic Number |
+ +
2 | |
+-----------------------------------------+-----------------------------------------+
4 | Message ID |
+ +
6 | |
+-----------------------------------------+-----------------------------------------+
8 | Protocol Version = 3 | Command = 8 |
+-----------------------------------------+-----------------------------------------+
To Next Page
Loading...
Need help?
General
