SwitchableUSB – 3 Supported Messages
3.19 Reply Configuration Response Data
This message is sent from a device to a client in response to a Request Configuration
Response Data.
3.19.1 Field Descriptions
- No filter
- Block mass storage devices
- Block all but HID and Hub devices
- Block all but HID, HUB and smartcard devices
- Block all but Audio and Vendor Specific devices
This field is reserved, and is set to 0
MAC address of a device that this device is paired with. This field is
optional and may be repeated up to 7 times
Port number that this device is connected to
The device's current IP address
The subnet mask of the device
The default gateway for the device
The DHCP server of the device
The number of downstream ports of the device
The Vendor ID of the device
The Product ID of the device
The Brand ID of the device
A 32-byte NUL terminated string containing the device's vendor name
A 32-byte NUL terminated string containing the device's product name
A 12-byte NUL terminated string containing the device's revision number
Byte Offset
+-----------------------------------------+-----------------------------------------+
0 | Magic Number |
+ +
2 | |
+-----------------------------------------+-----------------------------------------+
4 | Message ID |
+ +
6 | |
+-----------------------------------------+-----------------------------------------+
8 | Protocol Version = 3 | Command = 14 |
+-----------------------------------------+-----------------------------------------+
10 | High Speed status | MSA status |
+-----------------------------------------+-----------------------------------------+
12 | Vhub status | Current Filter Status |
+-----------------------------------------+-----------------------------------------+
14 | IP Acquisition Mode | Reserved |
+-----------------------------------------+-----------------------------------------+
16 | MAC Address |
+ +
18 | |
+ +
20 | |
To Next Page
Loading...
