Kramer SID-X2N - Kramer Protocol 3000 Commands

SID-X2N - Protocol 3000
25
25
12.2 Kramer Protocol 3000 Commands
The following table lists the Protocol 3000 commands that the SID-X2N supports.
For a full description of the commands, see the Kramer Protocol 3000 document
available from http://www.kramerelectronics.com.
Note: The SID-X2N can only receive commands from a device, (for example, an
HDBT receiver) via the HDBaseT link, and only at 9600bps.
Command
Description
#
Protocol handshaking
MODEL?
Read device model
VID
set video switch status
VID?
Get video switch status