6 Presentation Switcher / Scaler Buttons
The VP-724xl includes the following front panel buttons:
8 INPUT SELECTOR buttons
1
, see section 6.1
A PIP button
2
, see section 6.2
BLANK, MUTE and FREEZE buttons
6 OSD buttons
A RESET TO VGA button
A PANEL LOCK button, see section 6.3
6.1 Switching an Input
Each INPUT SELECTOR button can be used to select the source. It can also
be programmed to freeze the image or display a blank screen when pressed
again. Refer to section 7.5.9 for details.
You can switch seamlessly
3
between each input
4
that is connected to a source,
by pressing the appropriate INPUT SELECTOR button. The OSD status
appears superimposed over the top right corner of the screen for a few
seconds, as Figure 11 illustrates:
AV-2
Figure 11: OSD Input Status
1
The VP-719xl, VP-720xl and VP-723xl have 7
2
Not available on the VP-719xl
3 For glitchless transitions between inputs
4 To set the image transition speed (fast, safe or moderate), see section 7.5.5
To Next Page
Loading...
