Enlarge x 400%
Figure 25: OSD Enlarge Status
When you change the zoom ratio or zoom position, the screen image is
adjusted accordingly, and the change is reflected in the pop-up OSD Enlarge
status box.
7.4.2.1 Adjusting the Zoom Ratio
You can adjust the zoom ratio to up to 400% via one or both of these methods:
Using the Zoom + and/or the Zoom - control keys
1
on the infra-red remote
control transmitter (see Figure 16). The pop-up OSD Enlarge status box
continuously displays the zoom ratio and position, as Figure 25 illustrates
Using the OSD Menu buttons, as Figure 26 illustrates
Figure 26: Geometry (Zoom Ratio) Screen
1 The and the buttons
To Next Page
Loading...
