Kramer WP-5VH2 - Page 15

WP-5VH2 – Defining the WP-5VH2 Wall Plate
9
#
Feature
Function
1
REMOTE 5-pin Terminal Block,
(only on the WP-5VH2)
Connect to the remote, contact-closure switches for remote control, (see Section 5.1)
2
AUDIO OUT 3-pin Terminal Block
Connect to the unbalanced, stereo audio acceptor, (for example, an audio amplifier)
3
HDBT OUT RJ-45 TP Connector
Connect to a compatible HDBT TP switcher or receiver (for example, the TP-588D/TP-580Rxr)
4
Earth Terminal
Connect to the common ground (optional)
5
OPTION 4-way DIP-switch
Switches for setting the device behavior, (see Section 8.1)
6
RS-232 3-pin Terminal Block
Connect to the PC via RS-232 to transfer data
7
12V DC Connector
Connect to the supplied power adapter if there is no PoE provider over the HDBaseT