Kreg KHI-XLPULL User Manual

8
Operation (continued)
2
Install a Handle on a Drawer (continued)
h. Hold the jig rmly against the face of the drawer and drill the holes using the Adjustable Drill
Guides (E).
i. Install the handle and repeat the process for each drawer.
2h
E
E
Note When adding hardware to a cabinet with multiple drawers of the same width, add the End
Stop (D) for repeatable alignment if the width of the drawer allows.

Kreg KHI-XLPULL Specifications

General

Brand	Kreg
Model	KHI-XLPULL
Category	Tools
Language	English