10 Krell Showcase Processor
Getting Started, continued
The Showcase Processor provides a variety of connection and oper-
ation options for outstanding music and cinema soundtrack reproduc-
tion. To take full advantage of the features the Showcase Processor
offers, you’ll need to set up your system in this order:
1. Connect your Showcase Processor to the desired analog and
digital audio sources, video sources, and amplifiers. See
Connecting the Showcase Processor to Your System, on
page 27.
2. Configure the loudspeakers, input devices, and trims using the
built-in, easy-to-follow system configuration menus. Step-by-step
instructions begin on page 32, System Configuration.
3. Review the front panel, back panel, and remote control descrip-
tions for information on input, and mode selections, loudspeaker
adjustment, input and output connections for analog, digital, and
video sources, and remote control operation. See pages 11-27
for illustrations and descriptions.
After you’ve connected and configured your Showcase Processor
and know its basic features, you’re ready to go. See Operating the
Showcase Processor, on page 68.
AN INTRODUCTION
TO SYSTEM SETUP
To Next Page
Loading...
