Krell Industries Showcase - System Configuration (Continued); Speaker and Room Setup

Krell Showcase Processor 33
System Configuration,
continued
The first option on the main menu screen,
CONFIGURE SPEAKERS, lets
you tell the Showcase Processor how many and what type of loud-
speakers are in your system and select the bass range for each loud-
speaker. It also allows you to control the subwoofer output and set
the crossover frequency.
Select
CONFIGURE SPEAKERS on the MAIN MENU. The SPEAKER SETUP
screen appears.
If you have a 5.1 system, select
NO back speakers. If you have a 6.1
system, select
1 back speaker. If you have a 7.1 system, select 2
back speakers.
When 1 back speaker is selected, the signal is present at the left back output.
STEP 1
CONFIGURE
LOUDSPEAKERS
Speaker Setup Screen
SHOWCASE
-SPEAKER SETUP-
YES
YES
2
YES
FRONT
CENTER
SURROUND
BACK
SUB
CRSOVR
5.1 SURR
 FULL RANGE 
FULL RANGE
FULL RANGE
FULL RANGE
NORMAL
80 Hz
SURROUND
Note