Krell Industries Showcase - Step 2: Listening Room Setup

Krell Showcase Processor 35
System Configuration, continued
The second option on the main menu screen, ROOM SETUP, allows you
to tell the Showcase Processor the exact location of each loudspeak-
er in your system.
Select
LISTENING ROOM SETUP on the MAIN MENU. The ROOM SETUP screen
appears:
STEP 2
LISTENING ROOM
SETUP
Room Setup Screen
When you access the ROOM SETUP screen, the cursor is blinking at the
LEFT loudspeaker. Use the direction and enter keys to navigate the
screen, select loudspeakers, and enter the correct distance (0 to 30
feet) from the main listening position to the loudspeaker. After all the
distances are set, press the previous key twice to return to the main
menu.
Any speaker not configured in the SPEAKER SETUP menu displays N/A (not
available) on the
ROOM SETUP screen.
Note
SHOWCASE
-ROOM SETUP-
 LEFT 
0 FT
L SURR
0 FT
L BACK
0 FT
CENTER
0 FT
SUB
0 FT
C BACK
N/A
RIGHT
0 FT
R SURR
0 FT
R BACK
0 FT