Contents
Krell Showcase Processor iii
INTRODUCTION 1
DEFINITION OF TERMS 2
UNPACKING 4
PLACEMENT 5
AC Power Guidelines 5
GETTING STARTED 6
Please Read This First 6
To Select the Initial Video Signal and Format 9
An Introduction to System Setup 10
FRONT PANEL DESCRIPTION 12
BACK PANEL DESCRIPTION 18
REMOTE CONTROL DESCRIPTION 22
Battery Installation and Removal 22
CONNECTING THE SHOWCASE PROCESSOR
TO YOUR SYSTEM 27
First: Connect Analog and Digital Sources 27
Next: Connect Video Sources 28
Last: Connect Amplifiers and Sources 28
OVERVIEW: SYSTEM CONFIGURATION AND NAVIGATION 30
Configuration Steps 30
Navigation Conventions 31
SYSTEM CONFIGURATION 32
Accessing the Main Menu 32
Step 1: Configure Loudspeakers 33
Step 2: Listening Room Setup 35
Step 3: Calibrate Volume 36
Step 4: Configure Devices 38
Step 5: Configure Level Adjustment 47
Step 6: Operation 55
SAVING AND RECALLING CUSTOMIZED SETTINGS AND
RESTORING THE FACTORY DEFAULT SYSTEM SETTINGS 67
OPERATING THE SHOWCASE PROCESSOR 68
On/Off/Stand-by, Tape Input and Output 68
Simulcast 69
APPENDIX: OPERATING MODES FOR
THE SHOWCASE PROCESSOR 70
Automatically Detected Modes 70
User Selectable Modes 71
WARRANTY 74
RETURN AUTHORIZATION PROCEDURE 75
SPECIFICATIONS 76-77
Page
To Next Page
Loading...
