Krell Industries Showcase - Step 3: Calibrate Volume

36 Krell Showcase Processor
The third option on the main menu screen, CALIBRATE VOLUME, allows
you to calibrate each channel using the internal noise generator of
the Showcase Processor.
A sound pressure level (SPL) meter is required for this procedure.
Select CALIBRATE VOLUME on the MAIN MENU. The CALIBRATE ROOM SETUP
screen appears:
Press the enter key to choose
AUTO NOISE SEQUENCE. The AUTO
CALIBRATION screen appears:
System Configuration, continued
Calibrate Room Setup Screen
Auto Noise Sequence
Auto Calibration Screen
Note
SHOWCASE
-CALIBRATE ROOM SETUP-
SELECT THE CALIBRATION
METHOD
 AUTO NOISE SEQUENCE 
MANUAL NOISE SEQUENCE
PROGRAM MATERIAL
SHOWCASE
-AUTO CALIBRATION-
LEFT
 0 DB 
L SURR
0 FT
L BACK
0 FT
CENTER
0 DB
SUB
0 DB
C BACK
N/A
RIGHT
0 DB
R SURR
0 DB
R BACK
0 FT
STEP 3
CALIBRATE VOLUME
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.