Back Panel Description
See Figure 4 on page 17
18 Showcase Processor
The back panel of the Showcase Processor provides all audio and
video input and output connections, remote control inputs and out-
puts, power on and off, and power connection. The back panel func-
tions are described below.
30 Balanced Analog Audio Outputs
The Showcase Processor is equipped with eight balanced analog
audio channel outputs, with XLR connectors, for the left, center, sub-
woofer, surround left, surround right, back left, and back right.
31 Single-ended Analog Audio Outputs
The Showcase Processor is equipped with eight single-ended analog
audio channel outputs, with RCA connectors, for the left, center, right,
subwoofer, surround left, surround right, back left, and back right.
32 Balanced Analog Audio Inputs
The Showcase Processor is equipped with one set of balanced
inputs with XLR connectors.
33 Tape In Left and Right
The Showcase Processor is equipped with one set of single-ended
tape inputs with RCA connectors.
34 Tape Out Left and Right
The Showcase Processor is equipped with one set of single-ended
tape outputs with RCA connectors.
35 VCR In Left and Right
The Showcase Processor is equipped with one set of single-ended
inputs with RCA connectors, for a VCR audio source.
36 VCR Out Left and Right
The Showcase Processor is equipped with one set of single-ended
outputs with RCA connectors, for a VCR audio source.
37 Single-ended Analog Audio Inputs
The Showcase Processor is equipped with seven sets of single-
ended inputs with RCA connectors.
38 7.1 Audio Inputs
The Showcase Processor is equipped with eight single-ended 7.1
inputs for multichannel SACD and DVD audio devices. These inputs
are analog pass-through inputs.
FEATURES
Analog Audio Outputs
and Inputs
To Next Page
Loading...
