System Configuration, continued
Please read before
configuring audio
and digital inputs
The Showcase Processor is shipped with factory defaults for analog
and digital inputs. These defaults are the same for domestic and
international operation, and are listed in Table 4 below:
Table 5, on the next page, shows the audio operating modes avail-
able with the Showcase Processor. See also Appendix: Operating
Modes for the Showcase Processor, on page 70, for descriptions of
operating modes listed in Table 5.
Table 4 Factory Default Digital and Analog Audio Inputs for the Showcase Processor,
North American and International Operation
Krell Showcase Processor 41
Note
Audio factory defaults for the Showcase Processor do not need to be con-
figured if your system matches the factory defaults.
To Next Page
Loading...
