Krell Industries Showcase - System Configuration (Continued); Device Configuration and Assignments

To help you understand the numerous configuration options available
through the Showcase Processor, Step 4 illustrates configuring a
specific source device: a DVD player.
To configure other source devices, Krell recommends that you config-
ure one device at a time, using the menu’s step-by-step format.
Some Showcase Processor configurations are designed for digital
only, and some are designed for analog only. If you try to format an
analog source device using a digital configuration, the menu will not
let you proceed.
IMPORTANT
38 Krell Showcase Processor
System Configuration, continued
Please read
before continuing
on to Step 4
STEP 4
CONFIGURE DEVICES
The fourth option on the main menu screen, CONFIGURE DEVICES,
allows you to assign video and audio inputs to source devices and
configure triggers for devices in the system.
Select
CONFIGURE DEVICES on the MAIN MENU. The CONFIGURE DEVICES
screen appears:
Configure Devices Screen
SHOWCASE
-CONFIGURE DEVICES-
 CONFIGURE VIDEO 
CONFIGURE AUDIO
CONFIGURE TRIGGER
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.