40 Krell Showcase Processor
System Configuration, continued
The ASSIGN VIDEO INPUT screen lets you select the device to configure
and assign an input to the device. Assigned inputs correspond to the
inputs on the back panel. For devices that do not use a video input,
for example, a CD player, there are two options:
PREVIOUS or DISABLED.
PREVIOUS allows the last active video input to continue to
be displayed, as long as a previous selection has been made.
DISABLED turns off the video outputs.
You may also choose a standard video format, either NTSC or PAL,
and select whether the component signals are INTERLACED or
PROGRESSIVE/HD, depending upon your video source and monitor
capabilities.
Use the direction and enter keys (75) to navigate the menu and set
selections. When all selections are entered, press the previous
key (74) once to return to the
CONFIGURE DEVICES menu.
Assign Video Input Screen
Assign Video Input
Select CONFIGURE VIDEO from the CONFIGURE DEVICES menu. The ASSIGN
VIDEO INPUT
screen appears:
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.
To Next Page
Loading...
