Krell Industries Showcase - Page 65

Krell Home Theater Standard 61
System Configuration, continued
Program Remote Screens
Program Remote
SHOWCASE
-PROGRAM REMOTE-
USE FRONT PANEL UP
TO SELECT A COMMAND
SAVE SENDS COMMAND
AND RECALL EXITS MODE
REMOTE INPUT IS INACTIVE
 START 
The PROGRAM REMOTE menu allows you to program a learning remote
control to operate the Showcase Processor.
The infrared sensor on the front panel is inactive until programming
is complete.
Select
PROGRAM REMOTE from the OPERATION menu. The PROGRAM
REMOTE screens appear:
SHOWCASE
-PROGRAM REMOTE-
ONLY U AND D SAVE AND
RECALL ARE ALLOWED
ON FRONT PANEL. REMOTE
INPUT IS INACTIVE
Note