6 TECHNICAL DATA
30
OPTIMASS 6000
www.krohne.com 02/2016 - 4001894004 - MA OPTIMASS 6000 R04 en
6.2 Technical data
INFORMATION!
•
The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local sales office.
•
Additional information (certificates, special tools, software,...) and complete product
documentation can be downloaded free of charge from the website (Downloadcenter).
Measuring system
Measuring principle Coriolis mass flow
Application range Mass flow and density measurement of fluids, gases and solids
Measured values Mass, density, temperature
Calculated values Volume, referred density, concentration, velocity
Sensor model range
Sensor model rangeSensor model range
Sensor model range
Stainless Steel 316L 08...250 Compact / remote 100 barg @ 20°C / 1450 psig @ 68°F, temp. range
-70°C...+230°C / -94°F...+446°F
Remote only 100 barg @ 20°C / 1450 psig @ 68°F, temp. range
-50°C...+400°C / -58°F...+752°F
Remote only 100 barg @ 20°C / 1450 psig @ 68°F, temp. range
-200°C...+40°C / -364°F...+104°F
Hastelloy
®
08...80
Compact / remote 200 barg @ 20°C / 2900 psig @ 68°F, temp. range
-70°C...+230°C / -58°F...+446°F
Duplex Stainless Steel 100...200 Compact / remote 200 barg @ 20°C / 2900 psig @ 68°F, temp. range
-50°C...+230°C / -58°F...+446°F
Design
Basic System consists of a measuring sensor and a converter to process the
output signal
Features Fully welded maintenance free sensor with twin V-shaped measuring tube
Variants
VariantsVariants
Variants
Compact version Integral converter
Remote version Available with field or wall versions of the converter
Measuring accuracy
Mass (standard)
Mass (standard)Mass (standard)
Mass (standard)
Liquid (≥ 20:1 of nominal flow rate) ±0.1% of actual measured flow rate
Liquid (< 20:1 of nominal flow rate) ± zero stability (see zero stability below)
Gas ±0.35% of actual measured flow rate + zero stability
Mass (optional)
Mass (optional)Mass (optional)
Mass (optional)
Liquid (≥ 10:1 of nominal flow rate) ±0.05% of actual measured flow rate
Liquid (< 10:1 of nominal flow rate) ± zero stability (see zero stability below)
Repeatability
RepeatabilityRepeatability
Repeatability
Liquid Better than 0.05% plus zero stability (includes the combined effects of
repeatability, linearity and hysteresis)
Gas Better than 0.2% plus zero stability (includes the combined effects of
repeatability, linearity and hysteresis)
MA_OPTIMASS_6000_en_160222_4001894004_R04.book Page 30 Tuesday, February 23, 2016 4:03 PM
To Next Page
Loading...
