I - 2
General information
1.2.6 Connections
See Hydraulic system circuit diagram - See Page V - 5
See Electrical system circuit diagram - See Page A -10
1.2.7 Intended use
The XL series short-cut feeder wagons are built
exclusively for agricultural work (proper use).
Any other use is considered improper use. The
manufacturer is not liable for any damage resulting from
improper use; the risk is borne solely by the user.
Proper use includes following the operating, maintenance
and service instructions stipulated by the manufacturer.
Permitted loads:
agricultural storks such as hay, straw and grass silage.
The collection and loading of other
materials is only permitted after
agreement with the manufacturer.
In any case, the basic requirement is
that the load material is laid in
swathes and picked up independently
by the pick-up when it passes over.
1.2.8 General technical data
The weights shown on the serial plate must not be
exceeded when the short-cut feeder wagon is in
operation.
To Next Page
Loading...
Need help?
General
