III - 7
Start-up
3.5.4 Installing guard on the right/left
• Push the guard (1) on the right and left onto the tips.
• Fasten protective cloths (1) with tension springs (2)
to the frame.
3.5.5 Connecting indicators and position
lights on the right/left
• Connect connection cables (2) of the indicators and
position lights (1) in the relevant socket (3) on both
sides of the maize header.
• Check the lighting for function.
3.5.3 Parking supports in transport
position on the right/left
• Stop the machine.
• Remove the spring cotter pins (2) and push in
parking supports (1) .
• Secure position with spring cotter pin (2).
To Next Page
Loading...
