IV - 11
Maintenance
4.9 Installing PTO shafts
Take care in the installation of the PTO
shafts (1) that the cross joints (2) are
fitted parallel to one another.
4.10Hydraulic hose lines
Hydraulic hose lines may be used for 6
years at the most after manufacture.
The date of manufacture (month/year)
is stated on the hydraulic hose line.
• Check all hydraulic hose lines regularly and replace
them if they are damaged or show signs of ageing.
Replacement hose lines must meet the technical
requirements of the device manufacturer!
!
EC200490
To Next Page
Loading...
