Krone EasyCut 7540 - Page 35

Start-up
35
Pos: 15.16 /BA/I nbetriebnahme/ Schwader/Hin weisH ydrauli kaufkleber beachte n@ 9\mod_1219 997531785_78.doc @ 124879
Note
Connect the hydraulic lines correctly
• The hydraulic hoses are identified by coloured hose clips.
• When connecting the hydraulic lines, observe the sticker for the tractor hydraulics (see
the "Safety" chapter: "Position of the general information labels on the machine").
Pos: 15.17 /BA/I nbetriebnahme/ EasyCut/Hydra ulik/Hydrauli kanschluss Bild EC 9140/ 7540 @ 17\ mod_1236087118 303_78.doc @ 2 01128
Figure 11
Pos: 15.18 /BA/I nbetriebnahme/ EasyCut/Hydra ulik/Steuergerät 2 xEW @ 11\ mod_12233820627 98_78.doc @ 1 45797
Two single-action control units are required on the tractor to operate the machine.
Pos: 15.19 /BA/I nbetriebnahme/ EasyCut/Hydra ulik/Verweis auf Ki ppschalter and erB edienung EC 7540/9140 @ 11\ mod_12233829 73595_78.doc @ 1 45841
The following functions of control devices depend on the setting of the flip switches on the
control unit (see chapter on Operation "Function of the switches on the control unit".)
Pos: 15.20 /BA/I nbetriebnahme/ EasyCut/Hydra ulik/Anschluss H ydraulikleitung EC 7540/9140 mitQF B @ 11\mo d_12233823074 70_78.doc @ 145 819
Single-action control unit (1) (red 1):
• raises or lowers both mowing units from the transport position to the headland position
and vice-versa.
• raises or lowers the left mowing unit from the working position to the headland position or
vice-versa.
With the cross conveyor only:
• raises or lowers the left cross conveyor
Single-action control unit (2) (red 2):
• raises or lowers the right mowing unit from the working position to the headland position
or vice-versa.
With cross conveyor option only:
• raises or lowers the right cross conveyor
Pos: 15.21 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65