EasyManua.ls Logo

Krone EasyCut 7540 - Before Mowing

Krone EasyCut 7540
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
47
Pos: 19.12 /Überschrif ten/Überschrif ten 2/U-Z/V or dem Mäheinsa tz @ 3\mod _1204788384465_ 78.doc @ 7316 8
8.3 Before mowing
Pos: 19.13 /BA/Sic herheit/Gefahre nhinweise/Mä hwerke/Gefahr - Arbeitseinsatz / hen @ 73\ mod_1307695972 255_78.doc @ 6 54926
DANGER! - Using the machine for work
Effect: Danger to life, injuries or damage to the machine.
The glide skids must rest on the ground before start-up and during work
Maintain an adequate safety distance from the cutting tools during operation
There is danger of foreign objects being forcibly ejected even when the machine is
operated properly. Persons must therefore be directed out of the danger zone of the
machine.
Special care should be taken when working near roads and buildings)
Pos: 19.14 /BA/Sic herheit/Gefahre nhinweise/Mä hwerke/Uner wartete Bewegung d er Schneidwer kzeuge bz w.d esM ähwer kes.F ortschleudern von Steinen währendd es @ 3\mod_ 12047887563 40_78.doc @ 732 07
Danger! - Unexpected movement of the cutting tools or the mowing unit. Stones are
hurled up during operation
Effect: Danger to life, injuries or damage to the machine.
Do not carry out work on the disc mower until the PTO has been switched off, the engine
has been turned off and the ignition key has been removed! Secure the tractor against
accidental start-up and against rolling!
Support the lifted cutter bar! Never step under suspended loads!
Before using the machine, always check the protective devices for damage. Replace
damaged protective devices immediately.
Safe operation is only guaranteed if the blades have been fitted according to the
instructions!
Before starting operation, always check the mowing unit for damaged, missing or worn
blades, retaining bolts, leaf springs and cutting discs/blade drum; replace any parts that
are damaged, missing or worn!
Always replace missing and damaged blades in sets to prevent unbalanced rotation!
Never install unevenly worn blades on a drum/disc!
Whenever a blade is changed, also inspect the fasteners and, if required, replace them!
Move the protective devices into their protective positions.
Pos: 19.15 /BA/Be dienung /Eas yCut/Beim Mähe n Steuerventil sc hwimmstellung/s enken @ 9\m od_12208814 12391_78.doc @ 128661
Note! - While mowing
Effect: Proper use of the machine
Leave control unit(s) in the "Lower" or "Float position" position for work.
Pos: 19.16 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65

Table of Contents

Related product manuals