Krone EasyCut 7540 - Lighting; Lighting Connection

Start-up
37
Pos: 15.26 /Überschrif ten/Überschrif ten 2/A-E/B eleuchtung @ 0 \mod_1195658 399935_78.doc @ 1881
6.4 Lighting
Pos: 15.27 /BA/Sic herheit/Fahre n und Transport/ Beleuchtung/B eleuchtungsa nlage alle Maschi nen @ 7\mod_ 1215519058839 _78.doc @ 103 206
Danger! - Lighting system
Effect: Danger to life, serious injuries or serious damage to the machine.
• Before transporting on public roads, always connect the lighting system and perform a
function check.
• Keep the lighting system clean. Soiled lights and spotlights impair road safety.
• Replace defective light bulbs or broken spotlights.
• When transporting on public highways, the machine must be in the transport position.
Pos: 15.28 /Überschrif ten/Überschrif ten 2/A-E/A nschluss Beleuc htung @ 33\ mod_125438530 8979_78.doc @ 3 19105
6.5 Lighting connection
Pos: 15.29 /BA/I nbetriebnahme/ EasyCut/Beleucht ung/Anschlus sB eleuchtung T1 EC 7540/9140 @ 11\mod_122338 4700516_78.doc @ 145926
To comply with the Road Traffic Licensing Regulations, the machine is equipped as follows by
default:
• 3-chamber rear lamps (3) (direction indicator: reversing light and brake light)
• with red reflectors on the rear (4)
• with lateral yellow reflectors on the rear (5)
Pos: 15.30 /BA/I nbetriebnahme/ EasyCut/Beleucht ung/Anschlus sB eleuchtung T2 Bild EC 7540/9 140 @ 11\mod_1 22338499609 5_78.doc @ 145 948
2
5
3
4
EC810022
Fig. 12
Pos: 15.31 /BA/I nbetriebnahme/ EasyCut/Beleucht ung/Anschlus sB eleuchtung T3 EC 2800/3200 3210/4013/7540/91 40 @ 11\mod_1 222421634749 _78.doc @ 14 1790
The lighting system is connected via the 7-pin connection cable (2).
To do this:
• Insert the 7-pin connection cable plug (2) into the appropriate socket (1) of the machine.
• Insert the 7-pin connection cable plug (2) into the appropriate socket of the tractor.
• Position the cable so that it will not come in contact with the wheels.
Pos: 15.32 /BA/I nbetriebnahme/ Schwader/Hin weis Sauberkeit derSt ecker und St eckdosen @ 2\ mod_120239956 3131_78.doc @ 5 9273
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 15.33 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65