Krone EasyCut 7540 - Swivelling Parking Support into Transport Position

Operation
49
Pos: 19.22 /Überschrif ten/Überschrif ten 2/A-E/A bstellstütze in Tra nsportstellung schwenken @ 10\ mod_1221637 347634_78.doc @ 135539
8.4 Swivelling parking support into transport position
Pos: 19.23 /BA/Be dienung /Eas yCut/Abstellstütze /Achtung Abstellst ütze eingekl appt EC 280/320 CV- Q @ 10\m od_12216375327 43_78.doc @ 135563
Caution! - Parking support(s) not swivelled into transport position before road/transport
travel and for work!
Effect: Damage to the machine
• Make certain before road/transport travel and for work that the parking support(s) is/are
raised or folded in and secured in place with a bolt!
Pos: 19.24 /BA/Be dienung /Eas yCut/Abstellstütze /Abstellstütze eingeklappt Bild EC 7540/9140 @ 1 1\mod_12234 44129381_78.d oc @ 146330
EC800009
1
4
1
22
3
2
Fig. 21
Pos: 19.25 /BA/Be dienung /Eas yCut/Abstellstütze /Abstellstütze n einklappen EC 7540/9140 @ 11\m od_122344422 9897_78.doc @ 146352
The machine is equipped with three parking supports (1+2).
• The parking supports (2) on the right-hand and left-hand sides in working position of the
disc mower must be lifted and locked in position with the bolt (3).
• Swivel the parking support (1) backward and lock it in position with the bolt (4).
Pos: 19.26 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65