Maintenance – lubrication chart
94
Pos: 25.37.1 /Üb erschriften/Üb erschriften 1/U-Z/ Wartung - Sc hmierplan @ 0\mo d_119735930 4198_78.doc @ 18232
11 Maintenance – lubrication chart
Pos: 25.37.2 /Üb erschriften/Üb erschriften 2/P-T/S pezielle Sich erheitshinweis e@ 0\mod_1196660 495760_78.doc @ 9134
11.1 Special Safety Instructions
Pos: 25.37.3 /B A/Sicherheit/Gefa hrenhinweise/Mä hwerke/Gefahr Wartung allge mein EasyCut @ 1 1\mod_12236 20198301_78.d oc @ 148349
Danger! - When performing repair, maintenance or cleaning work on the machine, or in
the case of technical intervention, drive elements may start moving (caution, the cutting
discs continue to run).
Effect: Danger to life, injuries or damage to the machine.
• Move the machine to the working position and lower it to the ground
• Switch off the tractor engine and remove the ignition key.
• Secure the tractor against accidental start-up and against rolling.
• Switch off the PTO and disengage it.
• After repair, maintenance, cleaning work or technical modifications are complete, mount
all protective coverings and safety devices again properly.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a doctor
immediately.
• All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 25.37.4 /B A/-----Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4 165
To Next Page
Loading...
