Maintenance
79
Pos: 25.33.8 /B A/Wartung/Mäh werke/Messersc hraub / Messersc hnellverschl uss/Messerschra ubverschluss Hal tebolzen 14 mm@ 0 \mod_1197 267907375_78. doc @ 16425
10.10.2 Blade screw connection
Danger! - Insufficient thickness of material on the retaining bolts.
Effect: Danger to life or serious injuries.
• At every blade changing check the thickness of the holding bolts material.
• Damage or worn retaining bolts must always be replaced by sets on each cutting
disc/blade drum!
• The material thickness of the retaining bolts must not be less than 14 mm at the weakest
point.
EC-240-0
min. 14 mm
Fig. 44
Pos: 25.33.9 /B A/-----Seitenum bruch------ @ 0\m od_119617531 1226_0.doc @ 4 165
To Next Page
Loading...
