EasyManua.ls Logo

Krone EasyCut 7540 - Detaching the Machine

Krone EasyCut 7540
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
53
Pos: 19.43 /Überschrif ten/Überschrif ten 2/A-E/A bbau der Masc hine @ 3\mod _1204792387824_ 78.doc @ 7324 5
8.6 Detaching the machine
Pos: 19.44 /BA/Sic herheit/Eas yCut/Maschine abstellen_mit Hydrauli kschlauch @ 9\mod_12208832 08423_78.doc @ 128830
Danger! - Unexpected movements of the machine
Effect: Danger to life, serious injuries
No one is permitted inside the danger zone.
Park the machine on a solid and even surface.
You should not unhitch the machine until the engine has been switched off and the
ignition key has been removed.
Secure the tractor against rolling.
Use extreme caution when attaching implements to or detaching them from the tractor!
The accident prevention regulations must be complied with absolutely.
When connecting the hydraulic hose to and disconnecting it from the hydraulic system of
the tractor, the tractor system as well as the machine system must be depressurised!
Move the appropriate control valves into the flow position.
When detaching the machine, do not walk between the tractor and the machine!
Pos: 19.45 /BA/Be dienung /Eas yCut/Abkoppel nBil d EC 7540/91 40 @ 11\mod _1223450642553 _78.doc @ 14 6505
Fig. 24
Pos: 19.46 /BA/Be dienung /Eas yCut/Abkoppel nEC 7540/9140 @ 11\mod_1223450 393163_78.doc @ 1 46484
Lower the three parking supports (1) and secure them in position with bolts (2).
Use the tractor hydraulics to lower the machine to the ground.
Remove the PTO shaft (3) from the tractor and place it on the storage surface (4).
Disconnect the hydraulic hoses (5) from the tractor, fit the dust caps and hang them onto
the connection block.
Disconnect the connection of the lighting cable (6) between the tractor and machine and
place it in the supports provided for that purpose.
Disconnect the power supply plug (7) between the tractor and machine and place it in the
supports provided for that purpose.
Remove the control unit (8) from the tractor and fasten it to the three point block.
Remove the synthetic rope (9) from the tractor
Relieve the top suspension arm and pull out the bolt on the device side / unhook the top
suspension arm.
Pull out the lower suspension arm / release the catch hook.
Pos: 19.47 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65

Table of Contents

Related product manuals