Maintenance
86
Pos: 25.33.25 /Ü berschriften/Ü berschriften 3/K- O/Messerschnell verschluß @ 0\ mod_119727 1019859_78.doc @ 16597
10.11.2 Blade Quick-Fit Device
Pos: 25.33.26 / BA/Wartung/Mähw erke/Messerschr aub / Messers chnellverschlus s/Beschreib ungM esserwechs elM esserschnell verschluss @ 0\ mod_119727 1100500_78.doc @ 16616
EC-251-0
3 4
2
5
Fig. 50
• Clean the area.
• Remove damaged or worn blades.
• Push the special tool (1) {blade key} between the cutter disc (4) and leaf spring (3) and
press down with one hand.
• Guide a new blade (2) onto the retaining bolt and allow the blade key to return upwards.
• After fitting the blades, fold the protective device down again.
Note
• The cutter blades of anticlockwise rotating cutting discs / blade drums are different than
those of clockwise rotating ones. Make certain the direction of rotation is correct when
installing!
• The arrow on the cutter blades must match the direction of rotation of the corresponding
cutting discs / blade drums.
• The hex nut (4) used to secure the retaining bolts must not be used more than once.
Order No. for clockwise rotating blade: 139-889
Order No. for anticlockwise rotating blade: 139-888
Pos: 25.33.27 / BA/-----Seitenu mbruch------ @ 0\ mod_11961753 11226_0.doc @ 4165
To Next Page
Loading...
