Krone EasyCut F 320 CV - Maintenance Table and Tightening Torques

Maintenance
80
Pos: 73.10 /Übersc hriften/Überschri ften 2/U-Z/Wartungstabe lle @ 65\mod_13003694 13064_78.docx @ 583966 @ 2 @ 1
11.3 Maintenance table
Pos: 73.11 /BA/Er stinbetriebnahme/Easy Cut/F 360 CV/CR/War tungstabelle - EasyCut @ 250\ mod_1396960724543_78. docx @ 1937809 @ @ 1
Maintenance work
Maintenance interval
Once after 10 hours Before the beginning of the season Every 10 hours but at least 1x daily Once after 50 hours Every 50 hours Every 200 hours
Cutter bar
Oil level check
X X
Oil change
Not required
All gearboxes
Oil level check
X X
Oil change X
X
Checking cutter blades
X X
Checking retaining bolts for cutter blades
X X
Check material thickness of leaf spring, for blade quick
fastener design
X X
Mower disc / mower drum X X
Linings on the cutter bar X
Tightening screws / nuts
All screws
X X
Friction clutch
Venting
X
Guard cloths
Check guard cloths for wear and damage
X
V-belt
Check guard cloths for wear and damage
X
Checking V-belt tension
X
Pos: 73.12 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1