Table of Contents
4
3.7 Safety Equipment ............................................................................................................................. 31
4 Machine Description ............................................................................................................................ 32
4.1 Machine overview ............................................................................................................................. 32
4.2 Identification Plate ............................................................................................................................ 34
4.3 Information Required for Questions and Orders .............................................................................. 34
4.4 Overload protection .......................................................................................................................... 35
5 Technical Data of the Machine ............................................................................................................ 36
5.1 Technical data .................................................................................................................................. 36
5.2 Consumables ................................................................................................................................... 38
5.3 Tyres ................................................................................................................................................ 38
6 Control and Display Elements ............................................................................................................ 39
7 Commissioning..................................................................................................................................... 40
7.1 First installation ................................................................................................................................ 40
7.2 Preparations on tractor ..................................................................................................................... 41
7.2.1 Adjusting the lower suspension arms ....................................................................................... 41
7.3 Connecting the Lower Link ............................................................................................................... 41
7.4 PTO shaft ......................................................................................................................................... 42
7.4.1 Length adjustment..................................................................................................................... 42
7.5 Regulating direction of travel ............................................................................................................ 43
7.6 Checking / Setting Distance Between Tine Arm and Outrigger Arm ............................................... 44
7.7 Basic Setting of Rotor Inclination ..................................................................................................... 45
8 Start-up .................................................................................................................................................. 46
8.1 Preparations on tractor ..................................................................................................................... 47
8.1.1 Adjusting the lower suspension arms ....................................................................................... 47
8.2 Connect the machine to the tractor .................................................................................................. 48
8.3 Connecting the hydraulic lines ......................................................................................................... 49
8.4 Lighting connection .......................................................................................................................... 50
8.5 Install the PTO shaft ......................................................................................................................... 51
8.6 Using the safety chain ...................................................................................................................... 52
8.7 Swivelling parking support into transport position ............................................................................ 54
9 Operation ............................................................................................................................................... 55
9.1 Locking/releasing stop cock ............................................................................................................. 55
9.2 Removing the tine protections from the tine tips .............................................................................. 56
9.3 Lowering Outrigger Arms into Working Position .............................................................................. 56
9.4 Swivel tine arms to working position. ............................................................................................... 57
9.4.1 With rigid tine arms design ........................................................................................................ 57
9.4.2 For design with collapsible tine arm .......................................................................................... 58
9.5 Move the hoop guards to the working position. ............................................................................... 59
9.6 Travelling speed und drive speed .................................................................................................... 60
9.7 Swathing ........................................................................................................................................... 60
9.8 Move the hoop guards to transport position. .................................................................................... 61
9.9 Swivelling tine arms into transport position ...................................................................................... 62
9.9.1 With rigid tine arms design ........................................................................................................ 62
9.9.2 For design with collapsible tine arm .......................................................................................... 63
9.10 Raising Outrigger Arms into Transport Position ............................................................................... 64
9.11 Protecting the tine tips (transport position and rotary rake switched off) ......................................... 65
10 Driving and Transport .......................................................................................................................... 66
10.1 Preparations for road travel .............................................................................................................. 67
To Next Page
Loading...
