Krone Swadro TC 640 - Page 78

Krone Swadro TC 640

108 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

Settings

78

This page has been left blank deliberately.

Table of Contents

1 Table of Contents3
2 To this Document6
- Validity6
- Re-Ordering6
- Further Applicable Documents6
- Target Group of this Document6
- How to Use this Document6
3 Safety11
- Intended Use11
- Reasonably Foreseeable Misuse11
- Service Life of the Machine12
- Basic Safety Instructions12
- Safety Routines24
- Safety Stickers on the Machine26
- Safety Equipment31
4 Machine Description32
- Machine Overview32
- Identification Plate34
- Information Required for Questions and Orders34
- Overload Protection35
5 Technical Data of the Machine36
- Technical Data36
- Consumables38
- Tyres38
6 Control and Display Elements39
7 Commissioning40
- First Installation40
- Preparations on Tractor41
  - Adjusting the Lower Suspension Arms41
- Connecting the Lower Link41
- PTO Shaft42
  - Length Adjustment42
- Regulating Direction of Travel43
- Checking / Setting Distance between Tine Arm and Outrigger Arm44
- Basic Setting of Rotor Inclination45
8 Start-Up46
- Preparations on Tractor47
  - Adjusting the Lower Suspension Arms47
- Connect the Machine to the Tractor48
- Connecting the Hydraulic Lines49
- Lighting Connection50
- Install the PTO Shaft51
- Using the Safety Chain52
- Swivelling Parking Support into Transport Position54
9 Operation55
- Locking/Releasing Stop Cock55
- Removing the Tine Protections from the Tine Tips56
- Lowering Outrigger Arms into Working Position56
- Swivel Tine Arms to Working Position57
  - With Rigid Tine Arms Design57
  - For Design with Collapsible Tine Arm58
- Move the Hoop Guards to the Working Position59
- Travelling Speed und Drive Speed60
- Swathing60
- Move the Hoop Guards to Transport Position61
- Swivelling Tine Arms into Transport Position62
  - With Rigid Tine Arms Design62
  - For Design with Collapsible Tine Arm63
- Raising Outrigger Arms into Transport Position64
- Protecting the Tine Tips (Transport Position and Rotary Rake Switched Off)65
10 Driving and Transport66
- Preparations for Road Travel67
- Driving on Slopes68
- Switching off the Machine69
11 Settings70
- Setting the Working Height71
  - With Mechanically Adjustable Working Height71
- Adjusting the Working Width72
- Setting the Rotor Inclination74
  - Rotor Chassis (Serial)74
  - For the "Trailing Guide Wheels" Version76
- Fixing the Trailing Guide Wheels77
12 Maintenance79
- Spare Parts79
- Maintenance Table80
- Tightening Torques81
- Deviating Torque84
  - Testing the Screws on the Tines84
  - Torque of Wheels on the Running Gear84
- Tyres85
  - Checking and Maintaining Tyres85
- Replacing the Tine Arms (in Case of Repair)86
- Replacing the Tines (in Case of Repairs)88
13 Maintenance - Lubrication89
- Lubrication Points on the Universal Shafts89
- Lubrication Points on the Machine90
14 Maintenance - Hydraulic System92
- Hydraulic Circuit Diagram92
15 Maintenance - Gearbox93
- Main Gearbox94
16 Special Equipment95
- Tine Loss Safeguard95
- Chain for Height Restriction of Suspension Arms96
17 Malfunctions - Causes and Remedies97
18 Placing in Storage99
- At the End of the Harvest Season99
- Before the Start of the New Season101
19 Disposal of the Machine102
20 Appendix103
- Hydraulic Circuit Diagram103
21 Index105

Related product manuals

Preview: Krone Swadro TC 680

Krone Swadro TC 680

Preview: Krone Swadro TC 880

Krone Swadro TC 880

Krone Swadro TC 760

Preview: Krone Swadro TS 620

Krone Swadro TS 620

Krone Swadro TS 620 Twin

Preview: Krone Swadro 46 T

Krone Swadro 46 T

Preview: Krone Swadro 38 T

Krone Swadro 38 T

Krone Swadro 42 T

Krone Swadro 38

Krone Swadro 42

Krone Swadro 46

Krone Swadro 355