17
6 MENUS AND PARAMETERS IN OPERATING MODE
NOTE
You can set various temperatures and operating modes for the heating loop, pool, buffer tank, and DHW tank.
NORMAL
The Normal Regulator mode keeps your set temperature.
ECO
The ECO Regulator mode keeps the temperature at the set ECO parameter lower than the
Normal temperature.
For cooling, the ECO Regulator mode keeps the temperature at the set ECO parameter
higher than the Normal temperature.
COMFORT
The COMFORT Regulator mode keeps the temperature at the set COMFORT parameter lower
than the NORMAL temperature.
For cooling, the COMFORT Regulator mode keeps the temperature at the set COMFORT pa-
rameter higher than the Normal temperature.
NOTE
The KT–2A Controller allows for unlimited temperature parameters, and the system automatically adjusts the
temperature to the allowed values.
On controller KT-2A are displayed only menus which were activated in commissioning protocol.
Operating instructions
ADAPT, VERSI, ETERA and WPLV systems
17-19-45-6702-07
To Next Page
Loading...
